– High Thermal Conductivity Substrates for LED & Power Electronics
– Substrates for Power Electronics
Aluminum Nitride Active Metal Brazed (AMB) Ceramic tructural Parts
AMB (Active Metal Brazing) is for joining ceramics that are not wetted by ‘conventional’ brazes.
Aluminium Nitride Material Properties | ||
Properties | FUB-AN170 | |
Color | Dark Gray | |
Main Content | 96%ALN | |
Bulk Density(g/cm3) | 3.335 | |
Water Absorption | 0.00 | |
Flexural Strength(MPa) | 382.70 | |
Dielectric Constant(1MHz) | 8.56 | |
Coefficient Linear Thermal Expansion | /℃ ,5℃/min, 20-300℃ | 2.805*10-6 |
Thermal Conductivity | 30 degree Celsius | >=170 |
Chemical Durability(mg/cm2) | 0.97 | |
Thermal Shocking Resistance | No cracks | |
Volume Resistivity(Ω .cm) | 20 degree Celsius | 1.4*1014 |
Dielectric Strength(KV/mm) | 18.45 | |
Surface roughness Ra(μm) | 0.3-0.5 | |
Camber(length ‰ ) | <=2‰ | |
Remark: The value is just for review, different using conditions will have a little difference. |
Aluminum Nitride Active Metal Brazed (AMB) Ceramic
Application
– RF / Microwave Components
– Laser Diode Sub-mounts
– High Thermal Conductivity Substrates for LED & Power Electronics
– Substrates for Power Electronics
– High Thermal Conductivity Substrates for LED & Power Electronics
– Substrates for Power Electronics
Alumina Ceramic precision ball for bearing
High-temperature alumina ceramic tube
Alumina ceramic components
M2 M3 M4 M5 M6 alumina ceramic screw/ceramic nut
99% Al2O3 mechanical Alumina oxide ceramic seal ring
Alumina Ceramic Laser Reflector
Ceramic valve components.Including valve ball(O-port and V-port),Seats and other parts for full-lined ceramic ball valve.
ceramic insulators for heaters electrical ceramic insulators
Alumina liner tube/sleeve/cylinder for pump
Al2o3 ceramic shaft piston plunger