95V 45W Alumina Ceramic Specer Ring Heating Element for Coffee maker
- Description
- Inquiry
95V 45W Alumina Ceramic Specer Ring Heating Element for Coffee maker
Alumina Ceramic Spacer Ring Heating Element Specification:
> Voltage:95V
> Voltage:95V
> Power: 45w
> Resistances: 34ohm – 42ohm
> Working temperature: 100°C
> Resistances: 34ohm – 42ohm
> Working temperature: 100°C
Ceramic heater technology benefits:
* A fraction of the energy consumption compared to conventional element heater
* Long-lasting (non-aging)
* Time to ignition 60~90 seconds
* Tested to 100,000 cycles
* Easy to install and retrofit
*100°C at steady-state temperature
* Impervious to oxidation and corrosion
* A fraction of the energy consumption compared to conventional element heater
* Long-lasting (non-aging)
* Time to ignition 60~90 seconds
* Tested to 100,000 cycles
* Easy to install and retrofit
*100°C at steady-state temperature
* Impervious to oxidation and corrosion
Alumina Ceramic Specer Ring Heating Element
Alumina Ceramic Heater Design Structure
Ceramic Heaters are manufactured by printing resistors on alumina sheets,being laminated and sintered into
one pieces.
one pieces.
* Types:
■ Rectangular alumina ceramic heating element
■ Round shape alumina ceramic heating element
■ Rod shape alumina ceramic heating element
■ Rectangular alumina ceramic heating element
■ Round shape alumina ceramic heating element
■ Rod shape alumina ceramic heating element
■Tube shape alumina ceramic heating element
Thermal Properties for Alumina Heater | ||
Item | Unit | Value |
Vickers Hardness | Gpa | 11.5 |
Flexural Strength | Mpa | 300 |
Compressive Strength | Mpa | 2000 |
Modulus of Elasticity | Gpa | 300 |
Poisson’s Ratio | — | 0.22-0.23 |
Fracture Toughness | Mpam1/2 | 3.5-4.0 |
Thermal Conductivity | W/(m·k) | 25 |
Thermal Expansion Coefficient | 10-6/℃ | 6.5-7.5 |
Thermal Shock Resistance | △T℃ | 200 |
Maximum Use Temperature | ℃ | 1600 |
Dielectric Strength | KV/mm | >12 |
Dielectric Constant | εr | 9-10 |
Dielectric Loss Angle (1MHz) | — | 0.0002 |
Volume Resistivity | Ω.m | >1015 |
Specific Heat | J/(kg·k) | 0.78×103 |
Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.
Related Products
Alumina liner tube sleeve cylinder for pump
Alumina liner tube/sleeve/cylinder for pump
Alumina Ceramic Valve Disc parts
Alunima ceramic disc for faucet cartridge and valve .
High Purity Heat Resistant Alumina Ceramic Tube
Precision alumina ceramic tube
Al2o3 ceramic shaft piston plunger
Al2o3 ceramic shaft piston plunger
Al2O3 Ceramic Steel Shaft
Alumina Al2O3 Ceramic Steel Shaft
Alumina Ceramic precision ball
Alumina Ceramic precision ball for bearing
99% Al2O3 mechanical Alumina oxide ceramic seal ring
99% Al2O3 mechanical Alumina oxide ceramic seal ring
Ceramic Igniter for Wood Pellet Stove
Ceramic Igniter for wood pellet stove/soldering/water heater
Al2O3 Ceramic Substrate
Al2O3 Ceramic Substrate for electronics
Alumina resistor ceramic rod
Alumina resistor ceramic rod 3mm – 25mm
