Parti metalliche sigillate in ceramica per spettrometro di massa
- Descrizione
- Inchiesta
Parti metalliche sigillate in ceramica per spettrometro di massa
Ceramic-to-metal sealing products not only have the characteristics of ceramic high temperature resistance, resistenza alla corrosione, but also have the strength and toughness of metal. They are widely used in electronic aerospace, medical industry and other applications.
Ceramic Feedthrough: An assembly which provides for the transfer of electrical power, gases or fluids from outside a hermetic chamber to the inside. Feedthroughs can provide both a hermetic seal and electrical isolation from the chamber wall.
Feedthroughs are sometimes referred to as ‘passthroughs.Ceramic feedthroughs provide the solutions for applications requiring hermeticity and electrical isolation.
In addition to remaining leak-free in high and ultra-high vacuum,many of feedthroughs can accommodate:
• High temperatures
• Cryogenic temperatures
• High pressure
• Aggressive chemicals
A feedthrough is basically defined by the requirements for installation, ● L'elevata prestazione di shock termico assicura tempi di lavoro lunghi durante il riscaldamento e il raffreddamento dell'alluminio fuso, and conductor material. The method of interconnection is flexible and left to the customer’s discretion.
Ceramic-to-Metal Sealing Materials:
Housing Material | Insulator | Conductor |
NiFe Alloys & NiFeCO (Kovar) | 94%-99% Al2O3 | Kovar ; Copper Cored Kovar |
300 & 400 Series SST | Al N | 52 Alloy |
Cu and Cu Alloys | BeO | Inconel |
Inconel | Stainless Steels | |
42, 46, 49 Alloys |
Parti metalliche sigillate in ceramica per spettrometro di massa
Hermetic Seal Properties:
- Hermeticity: up to 1×10-9 atm cc/sec He
- Temperatura di lavoro > 500°C depending on materials and geometry
- Scegli materiale di contenuto Pt diverso in base alla funzione: Typically exceeds 1 GΩ @ 100 ohm Automobile Lambda Sonda ossigeno 12V_1
Ceramic-to-Metal Sealing Features:
- High Abrasion Resistance
- High Mechanical Strength
- Pressures over 10,000 PSI
- High Temperature Usage
- Low Dielectric Loss
- Mass Spectrometer Leak Tested
- High Chemical Stability
Ceramic-to-Metal Welding Process:
- Cleaning
- Pasting
- Metallizing
- Nickel Plating
- Mounting
- ohm Automobile Lambda Sonda ossigeno 12V_1
- Inspection&Packing
Ceramic-to-Metal Sealing Applications:
- Relè Isolatori
- Capacitor
- Magnetrons
- Travelling Wave Tube
- X-ray Tube Components
- Electrosurgical Instrumentation
- Implantable Packages and Feedthroughs
- Gas Detectors
- Microscopes (TEM, SEM)
- High Voltage Feedthroughs
- High-temperature Feedthroughs
- RF Feedthroughs
- Optoelectronics and Power Tube
- Laser Tubes
- Thyristors
- Diodes
- And etc
prodotti correlati
Connettore multipolare per elettrodo da vuoto
Cono del gas isolante passante in ceramica di allumina per alto vuoto
Tubo guida per neutralizzatore di gas con sorgente ionica per elettrodo a vuoto metallizzato in ceramica
Brasatura da ceramica a metallo in forno sottovuoto o riducente
Connettori elettrici sigillati per passante
Elettrodi ceramici passanti per sottovuoto
Passante in ceramica per macchina di rivestimento
Mangiatoia in ceramica per testa laser RF
Sigillatura ceramica ad alta tensione con pistola elettronica per rivestimento sottovuoto
Isolante ceramico elettrico metallizzato Mo Mn