化粧品エッセンスパッキング用アルミナセラミックポンプピストンスリーブ
- 説明
- 問い合わせ
化粧品エッセンスパッキング用アルミナセラミックポンプピストンスリーブ
The Ceramic Metering piston and cylinder is used for the liquid filling nozzle in the cosmetics package industry because it can keep the watertightness and anti-abraison while the nozzle works, contiously.
FUBOON technical Alumina Ceramic Pump Piston Sleeve including a ceramic piston, valve, cylinder set with housing. The housing for ceramic sleeves sets are typically comprised of 316 Stainless Steel, カスタム材料を使用することができ、要求に応じて入手可能です. The piston,valve,cylinder set is sealed by the fit of the piston into the cylinder. Our pump modules are positive displacement mechanisms that do not contain external valves and can run for hundreds of millions of cycles without measurable wear.
- Low maintenance cost
- High tech ceramics
- Fast assembly
- Hardness higher than stainless steel pumps coatings.
Perfusion Volume Scope: 0.1-2000ml or custom design.
Super High Perfusion precision: (perfusion transmitter is water for injection) ±0.25%
セラミックの性質:
·優れた物理的 & 化学的安定性 ·高温耐性
·優れた摩耗 & プレッシャー & 腐食& 絶縁抵抗と熱伝導率.
固体酸化物形燃料電池 | CNCによる生産能力 | AL2O3 | ジルコニアセラミックインペラ | SiC | Si3N4 |
密度 | g / cm3 | 3.65-3.93 | 5.95-6.0 | 3.12 | 3.23 |
アルミナセラミックネジ | 0 | 0 | 0 | 0 | 0 |
ポワシオンの比率 | / | 0.21-0.22 | 0.3 | 0.17 | 0.26 |
HV硬度hv | MPa | 1650 | 1300-1365 | 2800 | 1500 |
曲げ強度 | MPa | 310 | 950 | 390 | 720 |
熱伝導率 | W / m * k | 26-30 | 2-2.2 | 120 | 25 |
電気抵抗率 | Ω*mm2/ m | >1016 | >1015 | >103 | >1013 |
誘電率 | / | 9.6 | 29 | 9.66-10.03 | / |
アルミナセラミックネジ | CNCによる生産能力 | 8.7 | 9 | / | / |
熱膨張係数 | 10-16/k | 7.9-8.5 | 10.5 | 3 | 3.2 |
弾性係数young`smod | GPa | 280-340 | 210 | 440 | 300 |
曲げ強度(700℃) | MPa | 230 | 210 | 380 | 450 |
CNCによる生産能力 | MPa | 2200 | 2000 | 1800 | 2300 |
最高使用温度 | ℃ | 1750 | 1050 | 1550 | 1050 |
酸性アルカリに対する耐性 | / | 高い | 高い | 高い | 高い |
耐熱衝撃性 | CNCによる生産能力(℃) | 180-220 | 280-350 | 230-260 | / |
CNCによる生産能力 | MPa * m1 / 2 | 4.2 | 10 | 3.9 | 6.2 |
抗張力 | MPa | 248 | 250 | / | / |
化粧品エッセンスパッキング用アルミナセラミックポンプピストンスリーブ製造パラメータ:
| 追加情報: ·在庫のある商品は通常、数営業日で発送されます. ·単価と出荷予定日は、長さと数量が指定されたときに計算されます. ·直径公差± 3% or ± 0.003″ (0.076 んん), 真直度: ≤ 0.003″/1.000″ cumulative. ·カスタマイズ可能 カスタマイズ: セラミック部品メーカーとして, セラミックの特殊なサイズと形状のカスタマイズを提供します。高精度, 速い配達時間, 高組成 (テストレポート付き). |
耐熱バルブレスセラミック計量ピストンポンプ
セラミック部品メーカーとして, のカスタマイズを提供します セラミック 特殊なサイズや形状に対応高精度, 速い配達時間, 高組成.