22ML Alumina Ceramic Plunger Pump for Dialysis Machine

22ML Alumina Ceramic Plunger Pump for Dialysis Machine

  • Description
  • Inquiry

22ML Alumina Ceramic Plunger Pump for Dialysis Machine

Ceramic pump performance characteristics:
(1).Extremely inert chemical stability, acid and alkali resistance, corrosion resistance and high temperature resistance.
(2).super hard, wear-resistant, particle release is very small, long service life.
(3).the material is dense, the water absorption rate is lower than zero; the surface finish is extremely high, the friction is extremely small; the material residue is extremely small.
(4).the coefficient of thermal expansion is very small, the piston fits better,the filling machine has higher precision, and can be cleaned and sterilized online.
 
Filling range and advantages:
(1).According to different filling ranges, a variety of pump head specifications are available.
(2).reasonable structure layout, easy to disassemble, easy to clean, more convenient and convenient in maintenance and maintenance;
(3).All the contact materials of this machine are made of SS316L and high-purity ceramics, which have good resistance to acid and alkali corrosion
Model
FUW-22
Material
Plunger / Pump Cavity (Alumina 99.7%) + Pump Jacket (Stainless Steel 316L)
Single rotation plunger amount
0.5–5ml/rev
Speed (depending on the filling liquid viscosity)
0.5ml, the speed is 50-200 rpm 5ml, the speed is <45 rpm
Filling accuracy
±0.5%
Drive mode
Electric (stepper motor)
Net amount
3.8kg

22ML Alumina Ceramic Plunger Pump for Dialysis Machine

Application areas:

(1).Research institutes, laboratories, universities, pharmaceutical factories, hospitals, cosmetics, etc.
(2).widely used in the pharmaceutical, pharmaceutical, food, chemical, cosmetics industry, precision quantitative filling.

(3).for the precise quantitative filling of blood, biological reagents, oral liquid, injection, high-grade cosmetics, essence, fungicide and other liquids.
(4).Precision quantitative filling for various acid-alkaline corrosive liquids.
 
The amount of filling debugging For each filling material, the filling amount needs to be adjusted. The specific operation is as follows:
(1). first discharge the air to ensure that the inlet is filled with the material to be filled;
(2).Prepare the measuring cup, the electronic balance scale, and check whether the measuring cup and the electronic balance scale are accurate;
(3). If the angle is adjusted and the angle does not change, the filling amount will not change, and the user may not need to re-measure.
 

Contact Us